>I have read numerous articles on
>this ,but i am confused
>about how you rig the
>3 way swivel. is the
>bobber tied to it ,if
>so how much line ,or
>is it clipped?
If you are using the 3way swivel set-up for FnF ....... the float is clipped on one of the O rings of the swivel. One of the other two O rings is where you tie your main line (from the rod/reel). The third O ring is where you tie the line you have your "fly"(jig) tied on. The depth of the jig is determined by how much line you use ... typically 8-15ft. (now you know why you need such a long rod !)
For those that don't like so many "connections" ..... set the depth of the jig, by measuring out X amount of line - then wrapping the line around the float "clip" (3-4 wraps). No "extra" knots, or weight (from the 3way swivel) is involved ... and the line wraps, around the float clip, keep the line from slipping thru the clip -- and changing your jig's depth (+/-). ........cp