drill holes through the cooler andrun it just like it is on a boat.should be a braket on the toon to mount the pump.

| Search Fishin.com |
I would like to rig a livewell for my pontoon. Any suggestions on how to run the plumbing? I have a cooler under the drivers seat but i was looking for ideas on how to run the intake and overflow. Thanks for any suggestions.
drill holes through the cooler andrun it just like it is on a boat.should be a braket on the toon to mount the pump.
But how do you route the over flow? and do you mount the pump on the toon or just route the hose down to the water and keep the pum on deck?
the pump has to be below the water line so it will be primed.the overflow used a 90 degree fitting and the hose just went through a hole drilled in the floor straight down from the top of the livewell.it also had the recirculator pump,you buy livewell kits i believe from bass pro pumps fittings and hoses.
