Similar to Chatter Bait???

[Danny]

Today I found a "swimming jig" that looked a lot like the chatterbait, but it was from StrikeKing, I think... can't remember, and the blade was slightly different. It did not have a crimped blade, but instead appeared to have a smoothe blade.

Anyone else seen these?

Danny

[jeremys]

I bought a bait today called the "Chatter Jig" made by a company in Bardstown, it looks Very simular to the chatterbait but it doesn't have the tails. I haven't tried it yet but it looks good.
BTW...after looking at this bait close-up I'm gonna try and make some blades to add-on to my jigs to see if the action can be duplicted...

[tube]

there is some one making these bait at cane poles in richmond you can bay .007 stainless steel shim stock at mcmaster_carr.com 11$for 2 pieces will make 80 100 pieces

[mattplapp]

Gambler is making one. Its a little shorter and has a smooth blade as well.

Matt

[gettingonefishin]

Strikeking puts the blade on a split ring instead of directly to the eye of the hook and the blade gets hung up and doesnt move at all.

[rick1204]

I bought some made by gambler that matt is talking about and the blade thickness is .017.I bought some of the.007 from mcmaster-carr and it is not stiff enough, maybe i ordered the wrong stuff.

[VMAXX]

Rick Im using the shim stock (.007) from mcmaster and have had no problems, you want to be able to bend the blade somewhat as it needs to be tuned a little



~~~~~~~~~~~~~~
Vmaxx >)))^((">

[jeremys]

the blade on the chatter bug is .027 thick ( counting sticker) which should leave the blade being .025 thick. I've got alot of shim stock but the hard part is cutting it to the right diamentions.