WANTED: 24 or 26 raker johnson prop

[Embrey]

anybody in southern IN or closeby have an extra 24 or 26 raker johnson/evinrude prop laying around i could try for a day? or for sale? i need to see how one does on my boat. been through all the 4 blades and i dont like em.

[Les Young]

What boat & motor combo do you have ???

[Embrey]

400TE javelin and 200 johnson venom

[Les Young]

bbcboards.net in the Stratos/Javein forum & you can bet that someone or several will have your exact setup & can tell you what performs best on it or ask Mark or 21XDC in the props forum & they will point you in the right direction. I'd think a 26 Raker or Fury myself for your setup. Some even run Merc props on them.

[Embrey]

i have been through the whole song and dance already.pretty much need a 24 raker

[Les Young]

Just seems odd that that hull with a 200 would need a 24. If you were going to Cedar Creek or Cumberland I'd let you try mine as I run a 24 Raker original on a 95 Dyna Trak with 150 Intruder

[Embrey]

not sure why thats odd? thats what everybody says is the best on them. i have a brand new 26 raker now to try first

[onemorecast56]

Tell you what Rob you fix this 70 evinrude we talked about and i will getyou a 24 Raker!

[Embrey]

i gotta do some testing with this 26 first and see what it does

[GeoFisher]

i gotta do some testing with this 26 first and see what it does

I have a 26 rake........Just cut it down. It might be a little hard to use though. Maybe on your knees it will be ok

[lilmule]

You can run a 26 on it as its a three blade ive also ran 27p shooters but in order to work well need added cup,tro4 in 27p as well on a venom on a 20ft glassport.
As made say 3 1/2 deep will work fine go up any like the shooter added cup needed its a general performance type of prop.Gain some ponies I have a 29p shooter you can try.
Dont overlook merc or yammer props they will work on yours just not always vice versa excluding fat shaft.Like 25M or trophy.
I do have a 24 p raker but 13 spline for my four banger.

[Embrey]

ive got a TR04 now thats a 25, and this 25 renegade. ive done many many test passes with both at all kinds of heights and have come to te conclusion that both have 0 lift on this boat and lots of slip no matter what i do. as long as this raker can turn the rpm it needs to , i think it should get some more lift out of it