RE: Trouble turning right
sounds like it is blowing out.the engine is probably a little high or it may just be the prop,if you have a over\through hub style prop you need to change to a standard size prop to keep exhaust from going out over the blades,if you have a three blade you need to switch to a four.find someone who has a different one or two se if you can test them.what do you have on it now?
RE: Trouble turning right
I have a 3 blade prop. Don't know what you mean exactly about the over hub style.
RE: Trouble turning right
it will look like the prop is a little smaller than the gearcase,this lets a little exhaust go over the hub to allow slipping on take off so it will revv quicker.some props have vent holes,i had to have one welded shut on my raker to get it to vent less.For tubing with a bass ski style boat you need a prop that doesn't do this or you can have that one reworked,tell them what you are doing and they can customize it but you will lose topend probably.If you don't mind prop swapping the quad r jet 4 blade aluminum cabellas has are good and alot less than stainless,drop 1 size in pitch will make an easier hleshot,just watch top end rpm,but you probably have enough rpm room to play with,usually the extra blade will offset that some.