Printable View
[B][I]i am looking for ideas to make a drying wheel for my painted baits. i would greatly appreciate it if someone could post some pictures of their wheels, or tell me how to make a good sturdy wheel. i am not happy with what i have. any and all advice would be welcome. thanks, Bruce[/I][/B]
I built one out of PVC pipe and attached it to a rotiseri motor. Probably no more than $30 in parts. I can do 12 striper sized plugs on it no problem. I'll see if I can get a photo of it later. Note that if you are using something that sets up pretty quick like Devcon, you can just flip the plugs a couple of times without having to spin them.
Andrew
I don't have a clue to what a crankbait drying wheel is I got on here to see a photo. If it is what I think it is you could drill a few holes in the ceiling fan blades hang them on the blades and turn on slow speed.
Beep Beep
This is the one I built a number of years ago:
[ATTACH]1339[/ATTACH]
Andrew
thank you all for the advice, i came up with something pretty simple that works great. i tried the ceiling fan but it threw clear coat on my wife's grandfather clock. now im getting divorced. (not really) thanks again, Bruce
Go to [url]www.bassboatcentral.com[/url] and go to bait and rod building section and they have pictures of several different models.
Use an old bicycle rim with spokes, attach a rotisserie motor and you have a dandy.
Bassky