1 or 2 Sided, 6 or 12 Rod Rack

This is the plan for the rod rack I sold on the board.

It can be built to hold just 7 rods and be one sided, or 2 sided to hold 14 if the rods are 3 inches apart.

I recommend spacing the rods 4 inches apart to reduce reel clash. The plan shows you how to make the rack with the rods 4 inches apart holding 6 rods on one sided. This plan too can be double sided to make it hold 12 rods.

And with a little 1/14 PVC pipe, you can increase the 12 rod capacity to 18 rods, by adding 3 evenly spaced tubes on each of the sides of the rack. Those tubes are also a good place for dip nets or for landing nets.

That's it, I'm out of the rod rack plan business :). Just sharing in case it makes life easier.