Printable View
Hey guys,
I'm needing some slabs (casting spoons) painted. Probably 500 baits. I need them painted with vinyl paint and a two part epoxy clear coat finish. I'd need them in yellow chart. green chart. and white. (all solid colors) Let me know if this is something you could do and how much it would cost. (I'd also need a stick on eye and shad dot applied. I get both from WPT currently. No need to put a hook or split ring on.
Send me a private message and we can talk.
Thanks
Mitch
[QUOTE=Roosters Tackle;493898]Hey guys,
I'm needing some slabs (casting spoons) painted. Probably 500 baits. I need them painted with vinyl paint and a two part epoxy clear coat finish. I'd need them in yellow chart. green chart. and white. (all solid colors) Let me know if this is something you could do and how much it would cost. (I'd also need a stick on eye and shad dot applied. I get both from WPT currently. No need to put a hook or split ring on.
Send me a private message and we can talk.
Thanks
Mitch[/QUOTE]
That sure is a lot of work for a slab . The epoxy is ten times higher than the paint . Devcon 2t is the best to use . You must be fishing for something that has teeth .
what about powder coating ?
I would powder coat them. No need to epoxy after that. If you do use vinyl decon 2t is the way to go. By the time you paint 10 with vinyl you could paint 75-100 with powder.