Printable View
Tracy, did you notice anything loose or out of place with your axle bolts/springs? Hope your axle is not bent. But even a replacemnt axle should not be too much. If it is bent you may give one of the shops discussed in this tread a try. Hope you just had to square the axle and tighten those bolts.
[QUOTE=kydonky;446865]Tracy, did you notice anything loose or out of place with your axle bolts/springs? Hope your axle is not bent. But even a replacement axle should not be too much. If it is bent you may give one of the shops discussed in this tread a try. Hope you just had to square the axle and tighten those bolts.[/QUOTE]
I didn't notice anything wrong with the axle or bolts. My tire pressure was low on both but do not know if that was the problem. I'll rotate my tires to see if it wears on the opposite side.
[QUOTE=tracy;446906]I didn't notice anything wrong with the axle or bolts. My tire pressure was low on both but do not know if that was the problem. I'll rotate my tires to see if it wears on the opposite side.[/QUOTE]
How low?
Both of my tires are wearing bad on the very outside of the tires, like 2 in from the sidewall in is bald, and the rest of the tires are perfectly good. I also had low air pressure. (bout 10Pds) low. You guys think its the air or an axle of do i need a heavier ply tire? Its a single axle trailer with a 18.5 sx190 skeeter on it. It has C rated tires.