Installing a swing-away hinge

[sweetwater]

Would something like this work for you? If you're handy in the garage you could do it yourself or any good mechanic should be able to install it for you. http://www.etrailer.com/Trailer-Coup...DPB330301.html

[Wormin]

Would something like this work for you? If you're handy in the garage you could do it yourself or any good mechanic should be able to install it for you. http://www.etrailer.com/Trailer-Coup...DPB330301.html

Looks cool, and if you did not trust the bolts alone you could run a bead around the out side to be sure.

[sweetwater]

Looks cool, and if you did not trust the bolts alone you could run a bead around the out side to be sure.

Here's one that is designed to be welded on. http://www.etrailer.com/p-FHDPW330300.html

[Colbyt]

I have the bolt on model, installed by me, and experienced zero problems. You will burn up a bit or three making all those holes.

[4Fishman]

I have the bolt on model, installed by me, and experienced zero problems. You will burn up a bit or three making all those holes.

Thanks Colbyt, I may end up doing it myself.

[mvortex]

for the bolt-on: https://www.youtube.com/watch?v=2l4kYCtYJ4c

[4Fishman]

Would something like this work for you? If you're handy in the garage you could do it yourself or any good mechanic should be able to install it for you. http://www.etrailer.com/Trailer-Coup...DPB330301.html

Thanks Sweetwater! Yes, this is the same Fulton break away hinge I mentioned above. My main concern was to do it myself or have it done professionally. Thanks for taking the time to reply.