Organizing crankbaits

[SLP]

Thanks guys. I guess from having long heard and read how any foreign odor can scare off some fish it has me paranoid that using ink may spook that big one, but maybe that is the only way to really go. I was hoping for another alternative from someone but maybe there isn't a one.

[Duayne]

Sounds like there is a market for bait fish or crawfish scented markers!

[hairball]

Cranks were my go-to baits years ago, but after I discovered flippin sticks and soft plastics, cranks started taking a back seat more often than not. Here's an idea I had years ago but never implemented. Start with an appropriate size (diameter) short piece of pipe or a shell casing. Heat one end of it and press it into the backside of the lip, creating a very shallow round groove. Imagining that the circle is a clock face, scratch a straight line from the center of the circle to the outside. For example, if your bait is supposed to run at 8 feet, scratch in your "hour hand" at the 8 position. A frame of reference is needed to determine where "12 o'clock" is, but I always figured that if I held the baits the same way every time, that would work just fine. In other words, if I held the body of the bait in my left hand with the lip sticking out past my thumb, 12 would be at the farthest point of the circle and 6 at the closest. Did I just lose everybody?

[robertdilbert]

if your worried about smell, engrave it on there with a vibrating etcher. it will never wear off, and it wont smell. win win.

[FishFry]

Two techniques I use: Keep them in their original boxes and store in the deeper Planos with no dividers or cut the label from the package and leave it in the bottom of the Plano with the dividers so it lays underneath the bait so I know what it is and how deep it dives.

I am all about organization and it causes me to carry more boxes than necessary but I can always find what I need and never have things tangled up all over the boat.

[SLP]

Two techniques I use: Keep them in their original boxes and store in the deeper Planos with no dividers or cut the label from the package and leave it in the bottom of the Plano with the dividers so it lays underneath the bait so I know what it is and how deep it dives.

I am all about organization and it causes me to carry more boxes than necessary but I can always find what I need and never have things tangled up all over the boat.

That is what I have been doing but clearly I'm not as disciplined as you are and I end up losing track over time. Half the time I can't refit all the boxes back in and in the heat of the fun of fishing I end up with more open and not kept track of. Then I take some back and forth between kayak and boat and between different tackle boxes each time and in the end I haven't kept them as organized as I intended.

Maybe this year that can be a goal of mine while on the water this year.

[bigwormy]

I throw a lot of cranks. I label my tackle boxes as such, 1-5 ft, 5-8ft, 8-12 ft, 12-25 ft. I have 2 boxes for each depth and I place a #1 or #2 on the box also. I put my favorites of each different depth in the box labeled #1 and put the ones not used as much in #2. Therefore, I have my favorites in the boxes labeled #1 and I also have the depth they run written on top of the box. Makes it pretty simple for me. Last, any of the small silicone packs that you get when u buy some things, I try to have one placed in each individual crankbait slot in the tackle box to help prevent rust. Only put one crank in each slot to help reduce rust as well. Hope you were able to understand this as it works well for me.

[FishFry]

That is what I have been doing but clearly I'm not as disciplined as you are and I end up losing track over time. Half the time I can't refit all the boxes back in and in the heat of the fun of fishing I end up with more open and not kept track of. Then I take some back and forth between kayak and boat and between different tackle boxes each time and in the end I haven't kept them as organized as I intended.

Maybe this year that can be a goal of mine while on the water this year.

I throw everything I cut off into a tupperware box and at the end of the day/tournament/weekend when I clean up the boat I replace them all where they belong. On good weekends it may take 2-3 minutes but on weekends when I couldn't get a bite I may have to put away a couple dozen baits.

I keep my cranks in one rear compartment and every other kind of bait in the other. I have the 3700s labeled by depth and style in their trays.

[GeoFisher]

the idea is really not how deep it says it runs, but how deep.

I don't label anything.......Now, that doesn't mean I don't know how deep, but How deep has a lot to do with a LOT of factors.

Line type, line size, casting distance, rod in the water, etc, etc, etc, etc.

The ABSOLUTE key to crankin is getting the bait in the zone. AND knowing where that zone is for the particular bait you're using. With that being said, I'm no expert on crankin, but I absolutely LOVE using them.

If I'm ripping a bank in 6-10 ft of water, and I'm not hitting the bottom or hanging in the junk, I may need a deeper crank. BUT if I'm deliberately trying to run over the top of brush piles, etc, etc. Maybe a shallower crank is what I need.

Bigger lips, deeper. SQUARE lip, less hangups. Lipless, pretty shallow, but you can absolutely fish those deeper.

Instead of worrying about what the bill or box says.......figure out how YOU personally fish it, and then you're golden.

Not knocking anyone here, just trying to point out what I do.

Now..........let the cranking begin.........

BTW, soon, really soon I will be throwing my all time favorite cranks in shallow water, and catching some right nice fish..... .

[SLP]

Thanks everyone for all the great suggestions. Always nice to get some other ideas from fellow fisherman.

[Moveon]

Thanks guys. I guess from having long heard and read how any foreign odor can scare off some fish it has me paranoid that using ink may spook that big one, but maybe that is the only way to really go. I was hoping for another alternative from someone but maybe there isn't a one.

You can try to use an electric engraver to mark the bill with the depths. I personally love to fish with crank baits and always fished that way. I never worried about the exact depth until I started trolling cranks for suspended crappie. Then I started using the Bandit type crank baits that are pretty easy to tell apart. And if I let out enough line and feel them tipping the bottom once in a while I know I'm in the strike zone.

If you did use the ink and it's been on the bait for a while most of the volatile solvents have evaporated away leaving on the solids. Mark them and then let them sit out in the sun for a few hours and I bet that most of the solvents will have evaporated off the crank baits.

While it's true that fish have a keen sense of smell ( most of their brain is devoted to smelling) I don't think it would put the bass off of striking the baits. Bass hit cranks out of instinct. It's a reaction strike a lot of the times. Now if they start trailing the bait they might pick up some odor and may turn away. But I would think that you could spray the crank baits with some Fish Attractant and it would cover up the smell of any tiny bit of ink residue. And if there is any ink volatiles off gassing into the water it would be in the parts per Trillion if that much. Some Dr. Juice or other fish attractant would cover up any bad odors easily.

I wish I had all the boxes that all my crank baits and other lures came in. I'd sell them all for a huge profit to collectors.

[chadmack282]

strike king xd series cranks are all marked on bill.
DT series cranks from Ramada are also marked on bill.