Quote Originally Posted by luvtohunt View Post
I figured I would wire it straight. Just the red and black to my batteries with a jumper wire to connect the two. I have no experience with 12/24 volt motors only 12. I don't need the option to switch back and forth, would just rather be wired for 24 only. Do I need to change my plug if I do it that way?
If your not going to use the 12 volt side you will not need the white wire. First unplug the plug in, then wire your batteries like you said then take a voltage meter and check the voltage at the plugin and it should read 24 volts. Tape the end of the white wire and put a wire nut on lt or better yet shrink tub it.