Hi Guys, I could make a living at repairing trackers. The proplem is that they don`t put near enough rivets in their boats. Ok, here`s what ya run into,,,if you weld it you have to remove ALL things that will burn or you`ll burn your boat up. The Alumaweld which I`ve got too, you still have to remove the floor and all foam from close to it,,,and with the large area your working with you can`t get it hot enough for it to work right. I`d say if you can get to the spot, take out the rivet and replace it with a SS bolt with a round head, with rubber washer on both sides and lock nut. instead of JB weld,,there is a product call Labmetal thats great. I`ve used it alot on bass trackers. If you need any help at all just let me know.

Doug
[email protected]
[email protected]