I'll take a stab at this and someone correct me if I'm wrong. The set of numbers shows the average outflow of water from the dam per day. The first number is usually the current day if you look at the post after around 2:00PM. The 2nd number is tomorrow and so on and so forth. I believe that 3.2 is 3200 CFS. When Cumberland is running at full tilt it can spit out around 20,000 CFS or more, so you can see that the water release is at a much lower average. Now you can't really tell what the release schedule is from this data, it is just an average. They could relase 3,200 CFS all day or release 20,000 for just a few hours and shut it off, but you can make an assumption that the river level will be fairly low at these levels and shoals will be exposed at various points during the day. I will also say that these numbers will change each day and you can't really forecast the release levels for say 5 days out. You won't, however, see very drastic changes in these numbers unless we have heavy rain so you can make plans that if you see 3.2 four days out there's a pretty good chance that they won't be releasing a lot of water on that day. I do a lot of wading on Cumberland and generally when I see these numbers get around 7.0 and higher, there's not a whole lot of time for wading based on the water release schedule.
You should always check the TVA website the night before to get the actual water release for the next day. It usually updates for the next day in the early afternoon. I've never really seen them make changes to this schedule within 24 hours, but you should always be aware of changing water conditions. Would be interested to get a more scientific explanation on the numbers, these are just my observations.



Reply With Quote