Knots. Loop Knot for Jerkbaits?

[stratosjoe]

Kind of off subject but yesterday on some fishing show they suggested using a snap ring on your EWG hook with a senko or soft jerkbait if you are using heavy line, it provides more action. I am going to try it ....:-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-) :-)

[Dave Stewart]

Joe: A loop knot on those two applications will do the same thing and not add any additional weight to the rig.

[kc]

Dave,

I too primarily use the palomar knot for most applications - I can't say I have ever broken a knot off with the palomar. I have also tried the loop knot on jerk baits and shad raps but I didn't like it much in that I seemed to break off much easier -- especially on shad raps where the bait contacts bottom. Is there anything you do to deal with this or do you just live with the less strong loop knot? I have resorted to used duo-snaps which gives nearly as much action but is tied with a palomar.

kc

[Dave Stewart]

Kevin: I find what you are saying to be true with some mono and florocarbon lines. I use copolymer lines so I don't seem to have that problem. What you brought up here is a good point...if you are going to use a loop knot you definitely need to check the breaking strength of the line you are using after you first tie the knot. I have tied that knot on some client's lines in the 8 to 12lb test range and I could break the know with very little pressure. I have been using Gamma copolymer this past season and have had fish up to 7lbs in the boat on 8lb test.

[kc]

That makes sense Dave. I have been using 8# Cabelas line which is just standard mono and works well for most applications. I think I will give copolymer a try for this application because the loop knot does give more action to a shad rap. The duo snaps are ok but tend to mute the action some much like tying directly to the lure.

kc