Hey guys, I fished Dale last weekend with only one fish on a shiner but my motor kept alarming saying I was out of oil. I run a Johnson FastStrike 150 and the oil tank was full. A guy told me to put oil directly into the gas and run it just in case. I was thinking the oil could have been just too thick to be picked up. It was 2 degrees when I left home, 20 degrees when I put in. I did pump the oil bulb but this didn't seem to help. Any suggestions on what the problem could be. I'm going to try to put it in the water on a warm day and see if I still get the alarm or could I run it with the muffles on the motor with the hose and find out anything? I don't want to blow up my motor, any help is appreciated. Thanks, Gobbler