When does the Gander Mnt Store open up in Evansville?

[Moose1am]

Anyone know when this store is set to open up?

[daniel240]

Last I heard was October 1st.

[Moose1am]

I can hardly wait until then. There was a story today in the Evansville Courier&Press newspaper talking about Gander Mountain's Opening on Oct 1st. They may have a soft opening in Sept. There was a picture of the Store Front as it looked great. Log Cabin Type Front decor.

I've heard a lot of people talking about going to Gander Mountain in outdoors forums like this one. But most of the stores they talked about were in Northern Indiana.

I want to get a chance to see this store and someday visit the Bass Pro Shop Store near Jeffersonville, IN.

I tried going to the Gander Mountain Web Site but I was not impressed with the site. It was nothing like the Bass Pro Shop web site or the Cabalas web site. They have a lot more items on their web site. Not much there except guns on the Gander Mountain Web Site. I am hoping that they carry a huge supply of outdoor equipment in the store.

I know that ****'s Sporting Goods Store does not always carry the largest supply of things. But ****'s devotes a lot of space to gulf, exercise equipment, and other sporting goods stuff like Baseball, Hockey, basketball and other stuff. Dicks does carry a lot of nice things but they carry more items on the ****'s Web site than in their store. So if you can't find it in the store you can check their Web site and get something. But Gander Mountain doesn't seem to have that much on their web site.

I think that the Location for the new Gander Mountain Store will be great as there won't be as much traffic in this area as at the Burkhardt Road and Lloyd Intersection. For those that live in Evansville know that this intersection is very congested with the Best Buy Store, Home Depot, Target, Radio Shack, Drug Store, Walmart, Book stores, McDonald's and all the the other stores that you have to access though Burkhardt Road off the Lloyd.

The area where Gander Mountain will be located will have a huge parking lot and there are fewer stores in this immediate area.

I hope that Gander Mountain carries the new Humminbird Side scanning Sonar units in the store. I'd like to see one of these things first hand and see what it can do in simulation mode someday.

__www.courierpress.com/news/2007/aug/15/gander-ashley-moving-ahead/?ebj=1/ ___

[NFC]

Hey Moose1am, have you been by the store? It looks quite a bit like the store front of Bass Pro in Clarksville In. only smaller. I've been to the mentioned Bass Pro several times and I'm ready to go back. I am also ready for the Gander Mountain to open to see how they can supply the local fishermen.

As far as D***'s, I won't go back to that store for fishin gear, tackle or lures. Only place I've been able to find my favorite lure is Bass Pro. Wal Mart has a smaller version but I like the full size.

God 1st, Family 2nd and everyone else get in line . . .
A bad day of fishin is a day not fishin . . .
NFC

[Moose1am]

Yes I drove over to the new store location and got to look at the store front. It was after dark and it still looked good. Can't wait till they finally open the doors and I can shop there.

I went to D**** yesterday and purchased a laser range finder. I have 90 days before I can't take it back. I am trying it out.

I hope that Gander Mountain is a Remington Certified Gunsmith store. I have an older 1973 Remington Model 660 222 cal rifle that needs to have the trigger/safety fixed as per a 1979 Remington Recall. Remington will pay for it or I can ship it to the Remington Factory. I am hoping that I can get it fixed at Gander Mountain's new store here this Oct.

I hate to have to ship it all the way to Remington factory as that may be a lot of trouble and expense. It would be easier to have someone in town fix it while I wait. Wishful thinking.

Rajo's Gun shop will fix it but they have to ship it to the factory and I'll probably have to pay for that too.

I am in the market for a new ultra light spin cast pole to go with a new Pflueger reel that I picked up the other day.

The guys at D**** Store seem to always be more concerned about getting their stocking done than helping the customers at times.

I like to see the specs on any thing that I am about to purchase. I want to read the manual or at least look at it before spending 100 bucks on anything. The range finder cost 300 bucks and they acted like they were put out because they could not find a manual for the display unit. They had to go all the way to the front of the store to find a new unit that was stored inside a huge Safe up by the check out area. The manager had to open the safe and get a new boxed version of the range finder out so that I could look at it and check out the specs. I ended up getting the non camo one. I may see if they have the camo one and take this black one back and exchange it for the camo one. Or I may just return the entire thing and get a better one that has a lighted display. The one I got does not work at night.

I have a feeling there will be a lot of sportsmen shopping at Gander Mountain Store.

I saw on their web site that they have a lot of stuff going on with guns. Evansville can use a good gun store that can repair guns and sell them too.

It won't be too long before Oct gets here.

Hey Moose1am, have you been by the store? It looks quite a bit like the store front of Bass Pro in Clarksville In. only smaller. I've been to the mentioned Bass Pro several times and I'm ready to go back. I am also ready for the Gander Mountain to open to see how they can supply the local fishermen.

As far as D***'s, I won't go back to that store for fishin gear, tackle or lures. Only place I've been able to find my favorite lure is Bass Pro. Wal Mart has a smaller version but I like the full size.

God 1st, Family 2nd and everyone else get in line . . .
A bad day of fishin is a day not fishin . . .
NFC

[skeeter sf150sx]

Moose - just to let you know Dave's Gun Shop in Holland IN is pretty good at fixing just about anything on Guns. If you ever go to Patoka or want to fish some different lakes try swinging by his gun shop. just off the Interstate about 2 miles towards Holland. then swing over and check out two of Hollands lakes. You will need a permit though. My buddies that live in Holland have taken some 6,7, and 8lbs bass out of both lakes and they catch many crappie. Tight lines

[slipbobber]

the gander mountain up here in northwest indiana has a very nice display of guns and fishing supplys as for ****'s i have only bought a couple of okuma reels that were on sale

[NFC]

At this point, CVS is better equipped for fishermen than D***'s HA HA HA

God 1st, Family 2nd and everyone else get in line . . .
A bad day of fishin is a day not fishin . . .
NFC

[NFC]

The Holland lakes . . .

Where and how does a person get the permits?
Is there a cost?

Treating other as I wish to be treated . . .
Charlie

[skeeter sf150sx]

You have to go to the Water dept. which is right on their Main street, downtown Holland. Which is not very big at all. Just ask the attendent at the local Sunco gas station. When I bought a permit a few years back it was like $5. If you have a Holland water bill you can fish for free. And their one local cop (Carns) will check there periodicly and write tickets.

[NFC]

Thanx for the info Skeet. I'll hafta remember that nest time I am up that way.
NFC

[Moose1am]

Thanks for the tips. I use to go up to Holland, IN when I was a kid. My grandfather lived up in Holland and I have found memories of that town as a child.

How large are the two lakes and do they have concrete launch ramps? I have a hard time getting my boat to float off the trailer. Tires are too tall and the boat is too heavy. and the back end of my trailer sits higher than the front end. I need a new truck to haul my boat someday. LOL Then I will get a new trailer hitch that will level my trailer out better. My old Truck needs new rear shocks or something to raise the back end up higher. I went to the trailer places several years back and tried to get them to install a new trailer hitch system but they said they didn't make them that would fit my truck anymore. If I had gone the year before I could have got on. My bad luck. I don't know why someone could not weld a hitch to the frame of my truck somehow. I need a class II or better trailer hitch. Right now the 1 7/8" ball is secured to my trucks rear bumper. That's why the tongue is so low and the back end of the trailer is higher. This makes it harder to get the boat off the trailer. So I have to have a good steep concrete ramp since I have two wheel drive and not four wheel drive. I something get stuck on the Launch Ramp at the South end of Blue grass pit as the launch ramp has a shallow slope and I have to back the truck's back tires into the water to get the boat off the trailer. Any little algae growing on that concrete ramp will cause my rear truck tires to slid and I may end up with the truck in the lake someday. I need to buy a come along until I can get a new truck or trailer. LOL

I have had to be pulled out by another truck one time as I kept sliding deeper into the water with each attempt to pull the truck up the concrete ramp. Wish those ramps were grooved more to give us better traction. Or wish I had a longer trailer tongue or something to make launching easier. I am thinking about adding some Teflon to the top of the 2x4's on my trailer to make the boat slide of easier. I'll be working on that I guess.

Oh and the water is so low on blue grass pit that there is now a drop off at the end of the concrete ramp where your trailer tires can drop off into. I have had my trailer tires drop off about 4" to 6" at times these past two weeks. I think that the larger boats with the bigger gas motors are trying to push their boats up onto the trailer and washing out the end of the ramp in the process.

The ramp needs to be extended a few more feet while the water is still low or the lake needs to come up higher soon. We could sure use more rain here. Or they could dump or place some rip rap rock at the very end of the launch ramp's concrete to fill up any developing hole.