troubleshooting my trim

[tracker4stroke]

thanks for the info. if it was low on fluid would i check it and fill it if needed in the cap on the trim pump. the manual release works good that is how i got my motor up.

[GeoFisher]

Hey..........Be careful when checking the fluid. I'd DEFINITELY talk to a mechanic first.

I know you're only supposed to add fluid with the motor up? or is it down. I know you can damage it if you're not careful.

Later,

Geo

[cman]

should be all the way up to check fluid. If it is full and still won't go I would check the drive gear on the trim motor to make sure it is turning the pump. If thats good you probably have a bad pump