Knock Off Bait Storage System

[MsgMills]

After looking at the Cook's Storage System and the High Cost for two 12" unit's. I came up with an idea to use Vinyl siding, a "J" channel to make my own Bait Storage system.
I measured, cut, used my rotary tool and made the cuts in the channel and a 3/16 inch drill bit. I secured the Storage Rack under the compartment lids and check out the attached pictures. Works for what I want it for and will use.

http://i141.photobucket.com/albums/r59/MsgMills/BaitHolders003.jpg

http://i141.photobucket.com/albums/r59/MsgMills/BaitHolders002.jpg

http://i141.photobucket.com/albums/r59/MsgMills/BaitHolders001.jpg

[RoadToad]

Very nice!

[MrSplitshot]

That's slick as a whistle. Nice job.

I've got a couple of spare pieces of siding out in my building...looks like a nice little project for my Tracker.

[Danny]

After looking at the Cook's Storage System and the High Cost for two 12" unit's. I came up with an idea to use Vinyl siding, a "J" channel to make my own Bait Storage system.
I measured, cut, used my rotary tool and made the cuts in the channel and a 3/16 inch drill bit. I secured the Storage Rack under the compartment lids and check out the attached pictures. Works for what I want it for and will use.

http://i141.photobucket.com/albums/r59/MsgMills/BaitHolders003.jpg

http://i141.photobucket.com/albums/r59/MsgMills/BaitHolders002.jpg

http://i141.photobucket.com/albums/r...Holders001.jpg

Nice job Clyde. Sorry for taking so long to get back to you. I sent you an email through this site, I hope you have a working email listed in your profile.

If not, send me an email, and I resend the information.

Good luck....

Danny

[Tnstratos283]

Clyde: Sweeeeeeet.... and a professional looking job as well. You may have found your calling for a side/line job.

[Cobra190]

Looks good and well worth a try. Thanks for the thought..