How do you set your drag?

[House]

Everything I have seen seems to agree with the advice here. The pros all say you should use something that measures the pound of pull on the line of a bent rod. That way the angler takes into account the effect of the rod.

However, me... I take the easy way about it, I just pull it from the front of the reel.

[CTFSHWHISKER]

since i never get a fish i have to worry about peeling line off mine is usually set by the stump,rock method.If i need more pressure to break my line from a stump or rock then i tighten it down a little more.

[basshuntin]

I also use the pull on the line at the reel til it feels "bout right" method. As for turniningback the drag at the end of the day, I do it every time. Ive heard from guys that repair reels that it prevents flat spots on your drag washers and allows your drag to work smooher. If you get used to doing it , you will automatically check yur drag everytime you pick up a differant rod. This also helps you notice that drag setting hat your buddy set for you when you wern't lookin.

[21ssExtreme]

I also pull on the line at the front of the reel. I don't back the drag off unless I know that I am putting the reel away for a while.

[F16ENGMGR]

i never loosen my drag until i respool my line, then i reset it with a spring scale, off the end of the rod...

here's the idea, the rod multiplies the force and if you are using 12lb line and want your drag set at 10-11lbs, then pulling it straight off the reel at 10-11 lbs gets multiplied into 18-20 lbs over your rod and your 12 lb line breaks

i have a spring scale, i put the scale in my vice, then take a larger worm hook and hook it around the scale loop, with the line through the pole, i begin to pull up, just as if it were a fish, and start to tighten my drag until the scale reads 10-11 lbs, that is a safe number for 12 lb line, once you get a feel for it, it never hurts to check (hand in front of reel) while on the water

you can experiment and determine what you line actually breaks at, but be sure to completely respool in order to get the stretched line out, then turn the drag back to about 10% less than your break weight

like i said, i have never turned my drag down between fishing trips, but if any of you all know that it makes a significant difference, i would sure try it

YOU DO WHAT ?

[bigcarl6446]

Switch to 100 pound fireline and crank it down....can't get off then...just kiddin...there seems to be a concencious right in front of reel for me too....ANd I leave it there but check it almost any time i'm fishin


good luck...lots of good advice and some realy technical..if your that way.

Carl