Trailer Question

[Dester]

Just make sure you also have a locking pin on your reciever hitch.

[Fishin_4_Fun]

You should also have the ball welded to the receiver hitch, along with a locking pin, and locking coupler. If you don't, they can just unscrew the bolt under the ball, then stick it thru their receiver screw the bolt back in and worring about getting the coupler lock off after they pull your rig home.

[fishdaddy]

[welp come too think of it i too have the locking problem but where the hole is its very small and i cant find a lock thats small enough and long enough too fit it

[Fishin_4_Fun]

http://www.basspro.com/webapp/wcs/st...=SearchResults

you can get this one to span 2.3 or 3.5 inches.

[Col Forbin]

Wal-mart or any autozone has similar coupler locks (master locks). So far I have not had any problems out of it. I would also get a good lock for the spare tire. That is usually the first thing to disappear.

[TEFNKY]

They are not wanting trailers.....They want your catalytic converts!!!! Is there a lock for them?

[BanditMan]

Not to hijack the post but I'm working on something.. But you can Google Catlock and you can find something Good Luck!!!