Search Fishin.com

Results 1 to 4 of 4

Hybrid View

  1. #1
    Join Date
    Oct 2007
    Location
    BURNSIDE, KY
    Posts
    358
    Post Thanks / Like

    Re: livewell question

    If in deed you are moving the correct lever which it sounds like you are there is a cable that runs back to a manual valve. If the cable broke while in the on position it will always be open. It is hard to see down in there but try and look for your lines exiting the live well going to the back of the boat and you will see where it connects to. Have someone else move the lever back and forth as well to see if the cable is moving in the back. Generally you can feel the valve opening and closing if it is connected.

    Good luck!

  2. #2
    Join Date
    Jan 2007
    Location
    Knifley,Ky
    Posts
    210
    Post Thanks / Like

    Re: livewell question

    on my old boat the set screw came loose at the valve. when you would pull the handle the cable was just sliding back and forth and not operating the valve.

  3. #3
    Join Date
    Oct 2008
    Posts
    6
    Post Thanks / Like

    Re: livewell question

    you might check your valve for trash or debris that might be holding it open good luck.

Similar Threads

  1. Livewell help
    By mawi97 in forum Kentucky Discussion Board
    Replies: 3
    Last Post: 10-15-2010, 07:06 AM
  2. Livewell
    By Grambo in forum Boats - Buy, Sell, Discuss
    Replies: 2
    Last Post: 08-25-2010, 09:04 PM
  3. Livewell Pump Question
    By sglass in forum Kentucky Discussion Board
    Replies: 7
    Last Post: 08-22-2009, 03:44 PM
  4. livewell
    By cnorth in forum Kentucky Discussion Board
    Replies: 0
    Last Post: 03-12-2006, 06:19 PM
  5. livewell ???'s
    By Fishnhunt in forum Kentucky Discussion Board
    Replies: 3
    Last Post: 03-07-2006, 09:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •