Reply With Quote
Completely possible, hand or foot control? Either way the shaft would needed to be cut at the top/cover. There should be one bolt that holds the cover to the shaft, cut the shaft and drill a new hole..... There is plenty of room in the cover to tuck away 3-4 inches wire if that's how much you need to cut. Any more than that IMHO you would need to cut and re-splice the wires together. As far if its a foot control unit there should be a clamp in the cover that holds down the control cable, that would need to be loosened and the slack pulled out. As far as cutting the shaft I would use a pipe cutter so you don't dent or mar up the shaft.. Hope it helps...