Appreciate the pointers. Will give me something to work with next time I'm out there. This past weekend I was running buzz baits over top of lay downs and standing timber that was just below surface. Also ran cranks and spinnerbaits along side. Tried to make all of those run into the timber whenever possible. On the lay downs, I would hit the wood with the crank, and pause it, then try to hit the wood again. Spinnerbaits, hit the wood, slide over top, then drop a few feet before starting again. Figured I needed to find some way to isolate the productive stuff from the non-productive ones. Probably should get my depth finder fixed so I can locate the timber next to the deeper water....
I bought a pack of senkos this weekend. I had the distinct taste of vomit at the back of my mouth when I paid for them
At least they were on sale.
Andrew
Originally Posted by apb
Appreciate the pointers. Will give me something to work with next time I'm out there. This past weekend I was running buzz baits over top of lay downs and standing timber that was just below surface. Also ran cranks and spinnerbaits along side. Tried to make all of those run into the timber whenever possible. On the lay downs, I would hit the wood with the crank, and pause it, then try to hit the wood again. Spinnerbaits, hit the wood, slide over top, then drop a few feet before starting again. Figured I needed to find some way to isolate the productive stuff from the non-productive ones. Probably should get my depth finder fixed so I can locate the timber next to the deeper water....
Reply With Quote