Search Fishin.com

Results 1 to 6 of 6

Thread: Electrolysis

Hybrid View

  1. #1
    Join Date
    Dec 1969
    Location
    .
    Posts
    238
    Post Thanks / Like

    Re: Electrolysis

    I see white specks on the boat. The common ground your talking about, do i put the electrical tester on it and if so what goes to what like put red to neg on the battery and the black to the hull. I am not much for electrical testing or work. I called the dealer from which it came and they said sounds like a bad anode. Alot of the wires are buried and tied up to every thing its a pro team 185 tracker 2002. Thanks for the help

  2. #2
    HURRICANEBOB Guest

    Re: Electrolysis

    Quote Originally Posted by EZGO View Post
    I see white specks on the boat. The common ground your talking about, do i put the electrical tester on it and if so what goes to what like put red to neg on the battery and the black to the hull. I am not much for electrical testing or work. I called the dealer from which it came and they said sounds like a bad anode. Alot of the wires are buried and tied up to every thing its a pro team 185 tracker 2002. Thanks for the help
    Set an electrical tester to "continuity". Put one probe on the NEGATIVE pole of the battery, then go to the hull metal with the other. Red or black probe on either. You should get no reading, meaning there is no flow from the negative side of the battery to the hull. DO NOT GO FROM THE POSTIVE POLE OF THE BATTERY, DO NOT, SPARKS......

    Could be the anode, it should be on the lower unit of the engine. This is a relatively cheap attempted fix. Maybe 2 anodes, the trim tab is an anode, and part of the way up the lower unit there may be a second retangular one that sits in a pocket. Might ask the dealer did he mean one of the 2 or both.
    Last edited by HURRICANEBOB; 07-21-2009 at 12:11 AM. Reason: sp

  3. #3
    Join Date
    Dec 1969
    Location
    .
    Posts
    238
    Post Thanks / Like

    Re: Electrolysis

    They said there are two and I should try to replace them both, I started asking all this to them because my cranking battery died and I was going to buy another deka battery. I called deka for a dealer closer to home and was told that walmart, sears, autozone, napa batteries are made by them and I found one at Napa for 20 bucks cheaper as for the anodes I think they said the anodes were 16 bucks each thanks for the help.

  4. #4
    HURRICANEBOB Guest

    Re: Electrolysis

    Quote Originally Posted by EZGO View Post
    They said there are two and I should try to replace them both, I started asking all this to them because my cranking battery died and I was going to buy another deka battery. I called deka for a dealer closer to home and was told that walmart, sears, autozone, napa batteries are made by them and I found one at Napa for 20 bucks cheaper as for the anodes I think they said the anodes were 16 bucks each thanks for the help.
    No problem, glad to help, hope all works out okay. Electrical stuff can make your head hurt. Here's where I get my anodes from. Might save ya a buck or 2.

    http://www.boatzincs.com/mercury-zinc.html

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •