Leaking rivets, any suggestions????

[Lowerider]

I had the same problem and tried it all. None of it worked for long including the glue stick Joe mentioned. Your best bet - call Doug (onemorecast). He fixed me up several years ago (cheap) and I haven't had a problem yet.

[Oldyota]

Gluv-it works wonders, just follow the direction and it should be sealed for as long as you own the boat.

http://www.discountmarinesupplies.co...XY_SEALER.html

[crappiepappy]

My fishing partner's Tracker has MANY rivets that are patched ... we used Knead-it, and also JB Weld. The bulk of the patching jobs were done over 10yrs ago, and they haven't leaked since.

... pappy

[sam8772]

I used the green stick stuff from cabelas and it has worked great. I had about 20 leaky rivits on my jon and it is dry as a bone now. Make sure the surface is nice and ruff. Ware gloves when you put it on if it drips off it is like napalm and will burn and leave a scar. I speak from expierence.

[MsgMills]

I believe you can buy aluminum Welding rods that you just heat with a torch and weld the rivets if you like...Most welding supply stores carry them. If you can't find any I got a few from my uncle and you can have them if need be