Orange Seal Bearings

[BigBlue]

Thanks for the reply hardestyeric

Sounds like it may be a worthy investment.

[hardestyeric]

A couple things that I picked up on the other site are to make sure you order them dry (no lube). After you get them remove the shields and put the bearings in acetone or some other type of cleaner/degreaser over night. Then put only a drop of good lube on each one.
From what I understand the cleaner will remove anything that is left in them from the manufacturing process and then you only want a minimal amount of lube in them or the lube will actually add extra resistance and you won't get the full benefit.

[BigBlue]

Good advice

Thank you