Rod Building

[zx150]

I have built several. The best place to get all the stuff you may need is P&J tackle. The number is 1-865-376-5950 ask for Paul. He is an excellent builder and can help you with anything you may need.

I am here in Louisville and could help you out if you need anything. I am building 3 rods as I type this. I am getting ready to put the finish on some wraps that I just finished.

[apb]

Your first rod will be the most expensive as you'll need to pick up a rod wrapper (Cabelas has a cheap one that has worked well for me), thread, epoxy, and rod rotating drier (rotissory motor type deal, again Cabelas has a cheap one that works well).

I doubt I actually save money buy making my own rod, but I am able to set them up to my specs or build one a little different than what is commercially available.

Andrew

[lunkerbustin]

Thanks for all the info. I will need all the help I can get.

[tomo]

Ive built @ 100 bass cast and spin rods in the last 12 years or so. Your product gets better with each one you build. As mentioned earlier, "Rodbuilding.org" is the website of amature and professional rod builders. Forum, photo section, how to articles and a detailed list of just about any compang that sells the components you may need. The best custom builders in the country frequently post their ideas and reply to questions ask on the forum. Check it out.