1996 evinrude intruder 175 fuel system problems

[Trophyhunter8]

Hey, Onemore

I looked at the Mr. Gasket fuel pump. I found one that has 4-7 psi and will pump 35 gph is that what you have. Also, did you leave the fuel pump on the boat or take it off. If you took it off how did you do that.
thanks

[Trophyhunter8]

I just went out and checked the bulb this morning and it took a 1/4 pump to make it rock hard. I pumped it up last night before I went to bed. That would eliminate leaks from tank to pump wouldn't it.

[onemorecast56]

Hey, Onemore

I looked at the Mr. Gasket fuel pump. I found one that has 4-7 psi and will pump 35 gph is that what you have. Also, did you leave the fuel pump on the boat or take it off. If you took it off how did you do that.
thanks

we ran ours thru the pump..it will flow there it.. I installed it between the bulb and the motor..ran a hot wire from the key so that when you turn the key on it will run the pump,,we`ve had ours this way for 4 yrs now and not 1 bit of trouble,,our pump had gone all the way out...Oh,,,now I don`t know about your oil injection,,our we took off and mix our own gas,,I like mixing my whole due to burning up motors when they when out,,if i put it in the gas,,,I KNOW IT`S GOT OIL! but something to check on...

[Trophyhunter8]

I already mix my oil, so it should work fine

[cman]

The electric pump will work great and save a bunch of money. I have switched out 8 of these this year. People blaming ethanol for eating up the diapragms in the pumps. Not hard to do at all . If you have any questions give me a shout.