Search Fishin.com

Results 1 to 9 of 9

Thread: Primer Bulbs

  1. #1
    Join Date
    Jan 2007
    Location
    Avon, IN Maysville,Ky Columbia, Ky
    Posts
    221
    Post Thanks / Like

    Primer Bulbs

    I found a crack in mine yesterday and got a big shock.
    Due to 2011 EPA regulations Primer bulbs are being made of a different material and are now $29 at Walmart. You can still pick one of the old ones up from Ebay for less than $10.

  2. #2
    Join Date
    Mar 2011
    Posts
    6
    Post Thanks / Like

    Angry Re: Primer Bulbs

    Probaly so the 10% ethanol don't eat it up and crack again.
    BIG BASS



  3. #3
    Join Date
    Dec 1969
    Location
    Frankfort
    Posts
    353
    Post Thanks / Like

    Re: Primer Bulbs

    I found the same thing last weekend. Man was I shocked. I found some at an auto parts store. for $7

    Didnt know they where being made of different stuff due to the EPA. Quess I will be going back and buying a few bulbs and hoses to stock up.

  4. #4
    Join Date
    Mar 2009
    Location
    frankfort, ky
    Posts
    681
    Post Thanks / Like

    Re: Primer Bulbs

    I am more concerned with these new portable fuel tank like the 5 gallon gas cans you use for your lawnmower gas.

    They all have these new "spill proof/evaporation proof" spouts.

    on most of them you have to put pressure on the spout after unlocking it for fuel to flow.

    What I have found is that when filling a small lawn mower tank with a small opening you spill more on the ground that you can get in the tank.

    I bought a kerosene withone of these spouts and when the electric went out this winter I tried to fill the heater and found that you could not pour into a funnel with these spouts. As a result I had to fill a pitcher holding 5 gall can (about 40 lbs) with one hand and the pitcher with the other. This is quite a feet and creates quite a mess of spilled fuel.

    Anyone else have issues with these?

    So I have now disassembled the spout, took the spring mechnaism out and now use a rubber stopper to close it.

  5. #5
    Join Date
    Dec 1969
    Location
    bullitt co.
    Posts
    80
    Post Thanks / Like

    Re: Primer Bulbs

    The bad part is that the older primer bulbs and fuel lines were never designed to carry the levels of Ethanol that we're seeing in today's fuels. The rubber is disintegrating and clogging up fuel filters or the fuel lines inner linings come loose can be sucked closed or shed apart. I plan to replace everything from the tanks to the engine with the new stuff.

    I also bought a new 5 gallon kerosene can with the new spouts. At first I thought the new spout was to prevent spilling...it's obviously not. I hate that thing.

  6. #6
    Join Date
    Dec 1969
    Location
    Louisville. KY
    Posts
    2,970
    Post Thanks / Like

    Re: Primer Bulbs

    Quote Originally Posted by billm_usa1 View Post
    I found a crack in mine yesterday and got a big shock.
    Due to 2011 EPA regulations Primer bulbs are being made of a different material and are now $29 at Walmart. You can still pick one of the old ones up from Ebay for less than $10.
    Just my recent experience. A mechanic replaced my bulb and line from the tank to the engine with one of those new ones. The fuel line was shinny grey. Not sure if it was epa grade. I guess it was a relatively inexpensive unit. It was a joke. Basically it did not work all the time causing the engine to cut out at high rpm and the bulb did not pump all the time. Replaced it with a, get ready, $60 OMC setu up. Problems solved.

  7. #7
    Join Date
    Dec 1969
    Location
    Columbia
    Posts
    817
    Post Thanks / Like

    Re: Primer Bulbs

    Quote Originally Posted by peter View Post
    Just my recent experience. A mechanic replaced my bulb and line from the tank to the engine with one of those new ones. The fuel line was shinny grey. Not sure if it was epa grade. I guess it was a relatively inexpensive unit. It was a joke. Basically it did not work all the time causing the engine to cut out at high rpm and the bulb did not pump all the time. Replaced it with a, get ready, $60 OMC setu up. Problems solved.

    After many attempts of trying to post a picture of grey fuel line that came from a 2008 model boat I gave up. There has been more than one grey fuel line on the market for a few years. One is ethanol resistant and the other is not. Anybody wanting information about a link that gives details about which grey fuel line is ethanol resistant, you need send me an IM because I can not get the link/picture to load on this site...

    --
    Here's the link:
    http://www.bbcboards.net/zerothread?id=681502

    ..added by Peter
    Last edited by peter; 07-27-2011 at 09:55 AM.

  8. #8
    Join Date
    Dec 1969
    Location
    Louisville. KY
    Posts
    2,970
    Post Thanks / Like

    Re: Primer Bulbs

    ********************

  9. #9
    Join Date
    Dec 1969
    Location
    Columbia
    Posts
    817
    Post Thanks / Like

    Re: Primer Bulbs

    Thanks Peter for fixing the link.

    I believe if people open the link and see the 3 year old fuel line they will be shocked and run out to thier boat and inspect thier lines immeadieatly. What you see in the picture is not actually ethanol,it is the inside of the line being ate away because ethanol is much more corrosive than regular fuel...grey with red writing is asking for trouble...grey with blue writing can be ran with ethanol fuel.

    When running ethanol in boats,lawn mowers,weed eaters,chain saws or anything that will sit for a prolonged period of time you have the possibility of damage to your fuel system. Ethanol does cause harm to our vehicles but not as much because it does not sit for prolonged periods of time.

    One of my college term papers was about ethanol fuel. I had to choose wether I wanted to write about the pro's or con's of ethanol fuel. I found a lot of information on the internet while doing reshearch for my paper. There are good things about ethanol fuel but I believe the hamful effects out weigh them.
    Last edited by R19; 07-27-2011 at 08:56 PM.

Similar Threads

  1. Wtb primer solenoid
    By HunterShewmaker in forum Boats - Buy, Sell, Discuss
    Replies: 1
    Last Post: 04-19-2010, 07:16 PM
  2. black light bulbs
    By pitchinandgrinnin in forum Kentucky Discussion Board
    Replies: 1
    Last Post: 06-28-2007, 11:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •