was looking at it earlier and don't know waht this piece is or how it could have got turned and i'm not very good at describing stuff but it is above the prop, but below where the motor/lower unit goes over the top of the prop there is a piece that hangs down probably 1/4 inch thick inch and half down and goes back up at an angle.... it is connected to a circle piece that fits in to the part coming above the prop and is bolted in....

hoped that was described well enough that someone will know what i'm talking about and could tell me if i need to center this piece or leave it turned as is... but it is turned to the left <looking at the motor> and i'm assuming every little angle and parts back there matter when running a boat