casting distance

[NedFlanders]

Yea.........that is it.

I purchased a 10 pack for 50 bucks, I think.

These,. I think: http://www.vxb.com/page/bearings/PROD/kit726

Later,

Geo

how many reels can you do with the 10 pack ??

[catchandfillet]

What would you guess suggest for a cheap combo for casting big cranks??

[GeoFisher]

how many reels can you do with the 10 pack ??

Depending on the reels 4 or 5.

The bearings that you CARE about and can replace on the old Curado Greens are the spool bearing and the tension control bearing............

Here is a schematic: The 194 bearing parts can be replaced with the bearings i Listed in the link:

http://www.mikesreelrepair.com/schem...no_CU200B5.pdf

Checkout this link........this is good for most baitcasters....but CURADO 200's are used as an example:

http://reeltalk.reelschematic.com/co...0B-Maintenance

Here is another link to an index to most reels for schematics:

http://www.mikesreelrepair.com/schem...ls.php?album=8

[offdtop]

I can tell you hands down one of the best peices of advice I've gotten off this sight is to clean your bearings with lighterfluid!!!!!! I can not tell you how easy and perfect it is for the job.

And Geo I laughed because those are the exact links I used when I was researching "fine tuning" for my curado's....

[GeoFisher]

I can tell you hands down one of the best peices of advice I've gotten off this sight is to clean your bearings with lighterfluid!!!!!! I can not tell you how easy and perfect it is for the job.

And Geo I laughed because those are the exact links I used when I was researching "fine tuning" for my curado's....

Yea, a little maintenance goes a long way.

AND be SURE to re adjust your stuff BEFORE you tie on a 3/4 oz red eye shad and BLAST it out........Bird nest city.

It is amazing how much performance you will regain from cleaning your equipment.

I have one setup that I like that I used for fluke fishing and I can blast a Zoom Superfluke with it.....I mean BLAST......

Later,

Geo