Quote Originally Posted by kybassin22 View Post
for those of you that have this in you rig, what was the total cost you ended up paying after you have to buy all the other items needed to make it work. have seen 798 units for reasonable price but still have to buy several items to make it work properly. thanks.
Should work properly out of the box. If you want depth readings when you are on plane, you will need to install a Y cable and a dual beam transducer in the bilge (if it is fiberglass). The side imaging transducer cannot be mounted as shoot through hull or it will not work. You have to mount it on the transom or if putting the unit on the bow, on your trolling motor. That is the only issue I am aware of.