Search Fishin.com

Page 2 of 2 FirstFirst 12
Results 13 to 22 of 22
  1. #13
    Join Date
    Jul 2007
    Location
    Pikeville/Lexington
    Posts
    1,362
    Post Thanks / Like
    Quote Originally Posted by KentuckyBristle View Post
    Your comment about creek bottoms is similar to my way of thinking on it. The natural processes are the same, so the same principles must apply, right? The biggest difference is scale.

    I bet there are areas that change and shift pretty frequently, depending on conditions; a blanket of silt might deposit, and then a field of debris on top of it (logs, whiskey bottles...) and then the next "flood stage" might scrub it back to bare limestone for a while. I dunno. At any rate, I agree with you and MarkW that it must differ depending on the terrain around the river--I bet that around the knobs, there must be more rocks along the bottom.

    I would also guess that the current must sometimes carve out a deeper hole that will shift and disappear again.

    Here's another question for people who are commenting about the depth from their own experiences: is you measurement based on depth/fish finders? And are those sonar-based? If so, do varying water temperatures give odd readings regarding depth? (for instance, can it exagerate the depth, or hide how deep something truly is?)

    I want to sit down and talk with a geologist/hydrologist...but I don't know any...
    I am a geologist, not exactly a Hydrologist. I think most of you are on point. in higher velocity flows you will obviously lose alot of the silt and will experience a more bare rock, boulder (anything bigger than a fist is considered a boulder), pebbles and gravel surfaces. In your lower velocity flow areas (the closer you get to the Mississippi the slower the flow gets) and the more silt and mud you will encounter on the bottom. Every area of the river will be different. A major factor to consider is tributary mouths and what type of sediment is being fed from these tributaries. Some will carry more silt and clay others will be "cleaner" (less turbid) and carry more sand. Always remember your grain sizes from largest to smallest in both terms of weight and size are sand, silt, and clay. In my opinion you will see every sort of bottom depending on the immediate environment. Of course the addition of dams along the Ohio has increased the depth and slowed the flow down considerably and you are most likely looking at a major increase in siltation and mud accumulation above these dams (just something to consider). I do believe from everything I've read that the max normal pool depth of the Ohio is around 132' (Louisville) and it shallows gradually until it reaches the Mississippi.

  2. #14
    Join Date
    Dec 1969
    Location
    .
    Posts
    474
    Post Thanks / Like
    Quote Originally Posted by MagikSmallie View Post
    I am a geologist, not exactly a Hydrologist. I think most of you are on point. in higher velocity flows you will obviously lose alot of the silt and will experience a more bare rock, boulder (anything bigger than a fist is considered a boulder), pebbles and gravel surfaces. In your lower velocity flow areas (the closer you get to the Mississippi the slower the flow gets) and the more silt and mud you will encounter on the bottom. Every area of the river will be different. A major factor to consider is tributary mouths and what type of sediment is being fed from these tributaries. Some will carry more silt and clay others will be "cleaner" (less turbid) and carry more sand. Always remember your grain sizes from largest to smallest in both terms of weight and size are sand, silt, and clay. In my opinion you will see every sort of bottom depending on the immediate environment. Of course the addition of dams along the Ohio has increased the depth and slowed the flow down considerably and you are most likely looking at a major increase in siltation and mud accumulation above these dams (just something to consider). I do believe from everything I've read that the max normal pool depth of the Ohio is around 132' (Louisville) and it shallows gradually until it reaches the Mississippi.
    At the confluence with the Miss the Ohio is wider across. I agree that it just gets shallower and wider as it nears the confluence with the Miss.

  3. #15
    Join Date
    Apr 2011
    Location
    Louisville
    Posts
    47
    Post Thanks / Like
    Quote Originally Posted by MagikSmallie View Post
    I am a geologist, not exactly a Hydrologist. I think most of you are on point. in higher velocity flows you will obviously lose alot of the silt and will experience a more bare rock, boulder (anything bigger than a fist is considered a boulder), pebbles and gravel surfaces. In your lower velocity flow areas (the closer you get to the Mississippi the slower the flow gets) and the more silt and mud you will encounter on the bottom. Every area of the river will be different. A major factor to consider is tributary mouths and what type of sediment is being fed from these tributaries. Some will carry more silt and clay others will be "cleaner" (less turbid) and carry more sand. Always remember your grain sizes from largest to smallest in both terms of weight and size are sand, silt, and clay. In my opinion you will see every sort of bottom depending on the immediate environment. Of course the addition of dams along the Ohio has increased the depth and slowed the flow down considerably and you are most likely looking at a major increase in siltation and mud accumulation above these dams (just something to consider). I do believe from everything I've read that the max normal pool depth of the Ohio is around 132' (Louisville) and it shallows gradually until it reaches the Mississippi.
    Thanks, MagikSmallie, and everyone else who has commented.

  4. #16
    Join Date
    Feb 2011
    Posts
    149
    Post Thanks / Like
    Quote Originally Posted by MagikSmallie View Post
    I am a geologist, not exactly a Hydrologist. I think most of you are on point. in higher velocity flows you will obviously lose alot of the silt and will experience a more bare rock, boulder (anything bigger than a fist is considered a boulder), pebbles and gravel surfaces. In your lower velocity flow areas (the closer you get to the Mississippi the slower the flow gets) and the more silt and mud you will encounter on the bottom. Every area of the river will be different. A major factor to consider is tributary mouths and what type of sediment is being fed from these tributaries. Some will carry more silt and clay others will be "cleaner" (less turbid) and carry more sand. Always remember your grain sizes from largest to smallest in both terms of weight and size are sand, silt, and clay. In my opinion you will see every sort of bottom depending on the immediate environment. Of course the addition of dams along the Ohio has increased the depth and slowed the flow down considerably and you are most likely looking at a major increase in siltation and mud accumulation above these dams (just something to consider). I do believe from everything I've read that the max normal pool depth of the Ohio is around 132' (Louisville) and it shallows gradually until it reaches the Mississippi.
    Silt and clay will not settle unless the water is stagnant. When there is current, any deposits are swept off the bottom. Sand bars and silt are constantly shifting after every flood event. Most of these suspended solids never settle to the bottom; the only predictable bottom structures are shoals and rapids where the river can't carve out the earth at the same rate as soft-bottom areas.

  5. #17
    Join Date
    Jul 2007
    Location
    Pikeville/Lexington
    Posts
    1,362
    Post Thanks / Like
    Quote Originally Posted by restornator View Post
    Silt and clay will not settle unless the water is stagnant. When there is current, any deposits are swept off the bottom. Sand bars and silt are constantly shifting after every flood event. Most of these suspended solids never settle to the bottom; the only predictable bottom structures are shoals and rapids where the river can't carve out the earth at the same rate as soft-bottom areas.
    The water behind the River's 20+ lock and dams create the stagnant water and you do have sedimentation and settling of the Silt and Clay particles.

  6. #18
    Join Date
    Dec 1969
    Location
    Louisville, KY
    Posts
    651
    Post Thanks / Like
    Quote Originally Posted by Cobra_Joe View Post
    At the mouth of the Kentucky River there is a pool that is about 100' deep.
    Really???? where??? Never saw water that deep in that area. Is it in the KY river or on the Ohio river at the mouth of the KY river?

  7. #19
    Join Date
    Dec 1969
    Location
    Palestine, Illinois, USA.
    Posts
    1,733
    Post Thanks / Like
    If you were to dip all the water out of the Ohio with a sardine can the bottom would be covered with beer cans, pork frog jars and stink bait containers.

  8. #20
    Join Date
    Dec 1969
    Location
    Clarksville
    Posts
    723
    Post Thanks / Like
    Quote Originally Posted by MarkW View Post
    Really???? where??? Never saw water that deep in that area. Is it in the KY river or on the Ohio river at the mouth of the KY river?
    Right by Jeff Boat where they launch hte barges there is a 70 foot hole ...But this all depends on the level...But the place i am talking about is a catfish haven ..

  9. #21
    HURRICANEBOB Guest
    Quote Originally Posted by roadrunner View Post
    If you were to dip all the water out of the Ohio with a sardine can the bottom would be covered with beer cans, pork frog jars and stink bait containers.
    Darn....nobody found my car keys?!?!?!?!!??

  10. #22
    Join Date
    Dec 1969
    Location
    Greenville,IN
    Posts
    3,027
    Post Thanks / Like
    Quote Originally Posted by HURRICANEBOB View Post
    Darn....nobody found my car keys?!?!?!?!!??
    Or my five anchors.

Similar Threads

  1. Minnkota All-Terrain 65lb
    By Fishook28 in forum Boats - Buy, Sell, Discuss
    Replies: 1
    Last Post: 12-31-2011, 04:08 PM
  2. my spot
    By ironhead70 in forum Kentucky Discussion Board
    Replies: 8
    Last Post: 07-20-2010, 03:58 PM
  3. Looking for a new spot
    By WhateverIsBiting in forum Kentucky Discussion Board
    Replies: 3
    Last Post: 07-12-2009, 08:54 PM
  4. flat bottom or V bottom?
    By llg in forum Kentucky Discussion Board
    Replies: 7
    Last Post: 08-27-2008, 11:57 AM
  5. 4 hours in my favorite spot on the ohio saturday..
    By bigwormy in forum Kentucky Discussion Board
    Replies: 5
    Last Post: 08-06-2008, 04:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •