Get more mileage out of your
Senkos? You bet say many fisherman and Guides using our product
since January this year. Whether nose hooking, wacky rigging or
just plain ole traditional offset worm
hooking, Yamamoto Baits (softest in the world) will hang tough
with you cast after cast. Repairing
torn baits takes only 5 seconds to bond and you're back in the
water with a bait that is as soft and scentless
as originally poured and stronger at the newly bonded repair.
Expensive as most plastics are today that
catch fish, we've given you the edge and we stick to our 100%
guarantee to Stick and NOT dry up in the bottle
for 1 full year or refund your money. No Hype like the rest, Ours
Works! See our Testimonials... http://www.prosoftbaitglue.com/testimonials.html
| Mike: As an inshore/offshore guide in the Tampa Bay area, I cannot tell you how many times I threw away a partially torn grubs or Sluggos due to a small tear in the body. At 4 for $1.99, it soon gets expensive. That’s all changed once I tried PRO’s Soft~Bait Glue™ Jennifer Drain of LandBigFish.com fished with me
recently and brought along a bottle as a gift. I looked
at the bottle and stored it away in my tackle box for
future use. (Not thinking that I had a very valuable tool
inside!). Since then, PRO’s glue sits inside the console of
my boat—ready to fix any rip or tear that these
toothy predators generate. Now, if I can just figure out
a way to keep them from swallowing the whole body!! Good fishing to All!! "Fish
Chew-um - We Glue-em" © Made in the USA Hi Mike, In my business not only do I need to catch a lot of fish but like any other business the bottom line means everything. I also use your glue to keep my soft bodies on the hook with a drop of glue on the shank. This is the best product for fishing in years! Thank You!
Jim Dicken - Fishin.com / I recently used the PRO's Soft~Bait Glue to glue a Pork Chunk in place on a hook. It did not interfere with the action of the chunk and kept the chunk from riding on the hook and getting itself over the hook to prevent hooksets. I also used it to glue some Lake Fork Baits back together after I cut them in half.. This stuff works and is "In My Opinion, Better than other "SUPER GLUES". I also highly recommend this glue for use on Tube Jigs.. One drop on the tip of the hook and the tube will NOT come off. I ripped a Snoozers Tube in half with line intentionally then reglued it and caught fish with it. I then made some really neat baits using pieces of baits that I cut and reglued making new baits.. Fish have never seen these creatures... Jim Dicken REVIEW by: Bass Lure Review Mike also includes fine instructions with the product..... Well Sunday am arrived and I woke up my son for a morning on father and son fishing.. We headed to the local hot spot for smallies in Plymouth PA On the suski river..... Now the smallies down there kick the
living be willickerz out of tube baits.. I rigged up a salt/Garlic loaded tube and took one small drop As the instructions state on the base of they eyelet.. Pinched the tube a bit and let it set for 15 seconds, then tossed it in the water.. 5 Small mouth bass later the tube was still like new did not slip off and the glue held .............There was no tear by the eyelet on that hook... Then I got a snag and that was the end of the whole works.. My next test would be a Mr twister EXUDE quad tail skirted grub as well as some double tail grubs from yamamoto.. I chose these 2 for testing because the EXUDE is real slick and oily I mean these baits drip oil when you take them out of the bag.. and the yamamoto baits are real soft and tear easy as they are loaded with salt and old Gary yamamotos'special other ingredients and usually after 1 hit or hook up from a bass these things are dangling at the end of your rig/ jig head The EXUDE especially slip and slide all over your hook. MR Twister even came out with a special hook after their own pro field test to fix this issue with their latest bait.. I rigged them on a 1/4 ounce jig head then pulled the bait down on the shank about 1/4 inch added just ONE DROP Then quickly slid the bait up on the back of the jig head Held in place for about 15 seconds then tossed it in the river... On the 4th cast I had a bass and when I reeled this bass in and UN hooked it I noticed it tore the quad tail a bit Now so far I have used the product to hold things in place lets test the repair end of the product... If you do not understand how the EXUDE baits work please read my other review on them.. Why?? Because this was a real test Not only are these baits oily out of the package.. They get slimy as an oiled up trout when tossed in the water... That is how they are designed... therefore this ripped up quad tail was going to be a real test... Mike told me on the telephone that this product resists oils and stuff so we were going to see about that... I took the quad tail opened up the rip (wound) Placed ONE DROP in the center of the rip and pinched the bait back together, then tossed it right back in the river On the 3rd cast I brought it back in and took a good look at it and the bait was repaired like new. I also Grabbed the bait from the back of the jig head and tried to pull it down no way was I pulling this off the hook unless I ripped the bait apart.. Next was Charlie Cases Sinkin Salty Shad
and Magic Stiks Since I was out field testing them also
for another review.. The Same exact tests were preformed
***with one twist... I was not going to fully rig a stick
I was going to GLUE THE TOP TO THE HOOK TO SEE IF THIS
GLUE REALLY PREFORMED... Mind you this place we fish, there is a new bridge going up. Therefore there is strong current here as they have the river diverted through some huge tubes..... and by those huge tubes are strong current but this seems to be a place the bass love.. Again this stuff worked.. I was amazed.. I in this review also went and talked to 4 other fishermen and did a quick show/demo of the product they immediately asked where do I get this stuff??? I gave them each a card for the website.. Which Mike included in the test kit.. I also gave one fisherman if I recall right named ERIC Who was also with his son... A Tube bait that I rigged for him and glued the eye end to the tube. About an hour later he was still using the same tube bait I gave him as I wondered by to fish and he said these things work awesome I caught 3 pickerel on this in the weed bed and I never have gotten any pickerel here in the river.. I looked at the tube bait and it was
still attached and in good shape… Note here in
closing.. This glue is like water BE CAREFULL..
It will bond skin quick Tilt the bottle s l o w l y to
the plastic / hook and let the glue come to the part do
not just tip the whole bottle up side down Or you will
have a handful of glue....... Add a twist tail from Berkley power bait to the end of a tube… Get crazy with it Dream up your own plastic designs… RATING 10 there is no other like it.. It works You can order this direct from http://www.prosoftbaitglue.com And there is also a telephone number if you don’t like slamming your credit card via the web. If you do get to talk to Mike tell him
Dave White sent ya … or at least mention the review
you read here..
Mike's Glue Tip of the Week: Last Week's Glue Tip: >>
* FREE Holster - Special * To Order Call The Toll
Free to post is 1-888-433-3644 |
      |
