2 Cycle Oil

[know1]

We need to know the type and brand of the outboard......

It's an Evinrude.

[peter]

You can probably save some money here if you can buy a case at a time.

2 cycle oil 2-cycle oil evenrude oil johnson oil about 22/galon for xd 25 with shipping

http://suncoastmarineoil.com/evinrud...tboardoil.aspx

I have ordered from them twice.

[R19]

It's an Evinrude.

If the motor is an Evinrude and you want to use Evinrude oil we need to know what type of Evinrude. If it's carburated you can use XD 25 which is a regular oil or you can use XD 50 which is a blend 50% regular oil 50% syenthic or XD 100 which is a 100% syenthic. Choose which one you want. It will not hurt to change types of oil but I would not recommend changing back and forth from type to type pick one and stay with it.

Out of all the above mentioned oils XD 100 is the best because it is 100% pure syenthic. All 100% syenthic oil are made with an ashless formula. 100% syenthic oil does not build up carbon deposits and over a period of time it will actually clean carbon from your motor.

If it was my motor and it was carburated I would run XD 100 *if * I only used a couple of gallons per year. If I burned several gallons per year I would use XD 50 but you can get by with XD 25.The way a carburated motor delivers fuel and oil to the motor is totally different from direct injection motor;which results in less efficent burn and poor fuel/oil economy. If you choose XD 100 in a carburated motor it will be OK but due to the fuel/oil dilivery/combustion system you will not see all the added benifits of a 100% syenthic oil.

If the motor is an Ficht or E-tech (direct injection) it is recommended to run XD 100 but you can get by with XD 50

XD 50 is expensive and XD 100 will cost an arm and leg compared to other oils. With that beng said I run nothing but Amsoil HP Injector oil. It is 100% pure syenthic and cost $26 per gallon. If that is too expensive then I would run Pensoil 100% syenthic. I dont know the exact price but I have been told it is cheaper than Amsoil HP injector oil. Sorry for such a long reply and I hope I did not confuse you. To best answer your question I need to know if your motor is carburated, Ficht or E-tech;then you can get your answer from my above reply.

[otisray]

If your engine is a E-tec and the EMM is set for xd100 then you must use xd100.